We can provide fabricated Acrylic®, Plexiglas®, Lucite®, and Cyro Acrylic objects to your specification. We will quote on your drawings.
We have a full inventory of Lucite®, Acrylite®, Plexiglas®, and Polycarbonate sheets as well as engineered plastics. We also cary Acrylic fabrication kits.
We stock all sizes & colors and we can also cut stock to your sizes and ship anywhere in the USA. If we don’t have it, it probably doesn’t exist.
Inside Storm Windows
This year we are suggesting a less expensive, and more efficient Plexiglas® Mounting System, for your inside storm windows. We have a 2″ wide easily removable non-residue clear tape, which effectively hold the Plexiglas® in place, and seals against drafts 100%. A roll of tape is 2″ x 108″ long and sells for $9.40 each.
We recommend .093 (3/32) thick Plexiglas®, for smaller windows, approximately 15 sq. feet or less. For the larger windows, we recommend .125 (1/8″) thick. The .093 sells for approximately $1.55 per square foot, the .125 sells for approximately $1.95 per square foot.
For porch enclosures, you can use corrugated heavy duty fiberglass at $1.35 per square foot. It is translucent non see through. For Plexiglas®, the above mentioned window circumstances would apply.
We do not accept phone orders. Your inquiry or order would have to be in writing, via fax, e-mail or regular mail, and we would then reply.
For quotes, contact us.
Custom Acrylic Desk Pads
Custom made, to your specifications, clear acrylic desk pads. 3/16″ thibk, protects your desk surface, see through, for often used documents @ $3.90/sq.ft. Minimum order 6.
Lexan Chair Mats
Custom made, 3/16″ thick unbreakable Lexan, to your specifications, chair mats.
Minimum order 6.
Please Call For Quotes
Bullet Resistant Plastics
Unfortunately, security barriers have become a virtual necessity in areas where security is a problem.
We carry 1-1/4″ thick Acrylic sheets at approximately $46.00 per square foot dependent on sizes required.
For somewhat lesser protection, but also effective, we stock transparent 1/2″ thick Polycarbonate at approximately $15.00 per square foot.
We carry a product made by Sheffield Plastics, Inc. known as Hygard. This is a laminate, extremely effective for bullet resistance and comes in 3/4″ and 1-1/4″ thickness. It can only be priced on application depending on sizes required. The ballpark price is somehwere between $69.00 and $116.00 per square foot. Call for quote.
American Acrylics makes a pressed fiberglass sheet which is opaque, but can be used where see through is not a factor. It can be used in place of steel plate. Again, this can only be priced on a custom basis.
It should be noted and emphasized that none of the above products are “bullet proof.” The resistance is totally dependent on such things as caliber, angle of impact, etc. However, these products serve as a deterrent and provide a high degree of protection.
For further technical information and recommendations, please contact us.
Clear Polycarbonate (Lexan) Bubbles
Polycarbonate (Lexan) plastic break-proof bubbles can be used for skylights, bus shelters, covers for displays, models and kiosks.
For pricing information, please see our ceiling fixtures page.
Also available are engineered plastics such as:
- Phenolic Laminates
- Glass Polyester
PVC Sheets / Komatex / Celtec (Matte)